Conventional heat detector

Why to use a heat detector instead of a smoke detector? What is a home heat detector? Mircom carries a full line of heat detection devices for conventional fire alarm panels. Select a device from the list below. The 3Series operates within a controlled range of two to three degrees of their set points, regardless of the speed or rate of temperature rise.

Combination heat detectors provide both fixed and rate-of-rise detection. This enables the heat detector to communicate an alarm to the central control panel prior to reaching its fixed set point for high rates of rise, providing a timely response to both rapid and slow temperature increases. Notifier Conventional Detectors. The heat detector option can be set in one of three sensing modes. When triggere the conventional smoke or heat detector signals the main panel, which then activates its other connected components and warns occupants of an emergency situation.

Suitable for use with and zone fire alarm panels, our range of conventional smoke , heat and multi-sensor detectors include. A neutral white exterior and an unobtrusive, low profile housing make the TD heat detector blend onto any ceiling. The detector shall be either a single-circuit or a dual-circuit type, normally open.

The plastic housing fits onto any standard octagon or square electrical box with a trim plate. Heat Detectors for Fire Protective Signaling Systems. The unit will protrude no more than 1” below the surface of the finishing ceiling. Using a bi-metal disc as a heat sensing. The Fyreye Rate of Rise heat detectors (MKII-HR) use a thermistor arrangement to sense a quick rise in temperature and also a final threshold temperature of 57°C.

The Fyreye fixed heat detector (MKII-HF) has a single thermistor arrangement that gives an alarm at a temperature of 57°C. We have a comprehensive range of fixe High temperature and rate of rise devices, making the range suitable for areas where the temperature fluctuates for natural reasons. Dedicated to the Safety of Life and Property. In heat detectors with Normally Open internal contacts, the contacts will close when the detector operates either on a rate of temperature increase, or if the releasing temperature is reached. From gas stations to paint spray booths, from range hoods to large power generation systems, from engine compartments to schools, factories and offices, the D-A-F detector is on guar controlling the release of extinguishants such as clean agents, CO water or dry chemicals.

The FST-8is a Fixed Temperature Thermal Detector for use with ONYX Series panels. The FST-851R is a Rate-of-Rise Thermal Detector for use with ONYX Series panels. The FST-851H is a High Temperature Thermal Detector for use with ONYX Series panels. Conventional Detectors Detector Range Enlarge Photoelectric smoke detector (opto) is suitable for most applications giving the fastest response to slow burning or smouldering fires which give rise to large visible smoke particles. The KL7is a conventional optical smoke detector of outstanding performance, efficiency and durability.

The KL7series fire detectors are the ideal solution for conventional installations. They are designed specifically for use with Kilsen series conventional fire panels, but are also compatible with most 3rd party industry standard conventional control panels. The OSI-RI-SK is a intelligent addressable reflector-type linear optical beam smoke detector. It is uniquely suited for protecting large open areas with high ceilings, where spot-type smoke detectors are difficult to install and maintain.

Ideal applications include warehouses, atriums, aircraft hangers,. SafeCable System Components. You begin with any new or existing fire alarm control panel which. Fenwal Detect-A-Fire heat detectors combine the best features of both fixed temperature and rate-of-rise thermal detection, these units accurately sense the surrounding air temperature regardless of the fire growth rate.

Designed with a rugged outer shell, these units can withstand various shock and vibration conditions. Tyco SimplexGrinnell provides a comprehensive array of fire alarm, fire sprinkler, fire suppression, integrated security, emergency communications, soun and nurse call systems and services. With one million customers, 1local offices, and over 2years of history in the fire business, Tyco SimplexGrinnell is advancing safety.

With a conventional alarm, each device will be connected to the control panel via its own wire, rather than a shared one. One end of the wire will be touching the device, and another touching the control panel.