Joining a motorway

Things to remember when joining the motorway : Give priority to traffic on the motorway. Assess and adjust your speed to match traffic already on the motorway. Use your mirror signal manoeuvre routine. Joining the motorway (259) give priority to traffic already on the motorway.

How should you react to traffic joining from a slip road? Hint Stay in the left-hand lane long enough to get used to the higher speeds of motorway traffic before considering overtaking. What should you do when you’re joining a motorway ? A: Use the hard shoulder.

B: Stop at the end of the acceleration lane. C: Slow to a stop before joining the motorway. D: Give way to traffic already on the motorway. Looking for a better way to track your progress? Once you have checked the motorway traffic, and you have ensured you have a long good signal to show everybody your intention of joining the motorway , you need to merge into the traffic.

Most drivers in the left-hand lane of the motorway will move into the middle or the right lane motorway to allow you room to enter. If the sliproad onto a motorway runs uphill, then the vehicles joining , particularly lorries, are likely to be travelling significantly slower than if the sliproad runs downhill to join the carriageway. Motorway slip road – joining a motorway. The slip road is used to adjust your speed to fit in with the traffic already on the motorway. We strongly recommend taking some motorway lessons with a professional driving instructor.

Rules for motorways , including rules for signals, joining the motorway , driving on the motorway , lane discipline, overtaking, stopping and leaving the motorway. Joining a motorway is one of the most intimidating aspects of driving, especially if you try it during the dreaded rush hour. But, here are a few tips to help you.

If you are on a road that turns into a motorway, you don’t need to worry about this. This is the most common approach to a motorway. With practice, you will become more confident and find the process easier. The main process for joining a motorway is: to assess the traffic on the motorway as early as possible from the slip road and to adjust your speed to a similar speed that they are driving.

These are every 5metres. The red reflective studs are there to warn against exiting at that point, this is because that point is in fact a lane that is joining the motorway. When you join the motorway you will normally approach it from a road on the left ( a slip road) or from an adjoining motorway. Use the slip road to accelerate until your speed matches that of the traffic on the motorway.

When you have joined the motorway it’s important to travel in the right lane. When joining a motorway , you should always give priority to vehicles already on the motorway. Some slip roads eventually become the left-hand lane of the motorway. If this is the case, stay in your lane until you fully join. You should be made aware of your exit junction well before you need to leave the motorway.

Joining and leaving the motorway Before you join a motorway, build up speed on the slip road. Make sure you do a full observation, not forgetting the blind spot, and join the motorway when you know it’s safe to do so. When you leave a motorway, observe the interchange signs and make sure you’re in the correct lane in advance. Try to join the motorway without affecting the progress of the traffic already travelling on it.

Always give way to traffic already on the motorway. At busy times you may have to slow down to merge into slow-moving traffic. You join a motorway by using a slip roa the procedure for which is the same as for when joining a dual carriageway. To watch our dual carriageway joining video tutorial.

Match your speed when joining a motorway. The key to joining a motorway safely is to match the speed of the cars already travelling on the motorway. The driver of a car joining from a slip road usually cannot see traffic on the carriageway as clearly as drivers on the carriageway can see him. The approach to a motorway is usually from a road on the left.

Watch for a gap then increase your speed to safely merge with the traffic. During busy times, there s often a queue of traffic in the right lane, but people also use the left lane to join which goes right to the very end of the sliproad.