Most smoke alarms come with a mounting base that separates from the alarm itself. This base will have key-shaped screw holes to allow you to fasten the base to a wall or ceiling. Once you’ve determined the location for your alarSelect a drill bit slightly smaller than the size of the supplied wall anchors to ensure a snug fit. When it comes to mounting smoke and fire detectors , a lath and plaster ceiling is no different than a plasterboar drywall or concrete ceiling.
Mounting is achieved using two or more small screws. These instructions are generic – make certain you check the packaging of any alarm you acquire for specific instructions. Installation of an alarm is easy, and should only take a few minutes. NOTE: Do NOT attach a smoke or carbon monoxide alarm to the ceiling with tape or glue.
The alarm will not function if it has fallen from the ceiling. Screw free attachment A great way to attach your smoke alarm without having to worry about screwing into ceilings or walls and worrying about what wires are hidden behind the plaster. Smoke alarms cannot provide an alarm if smoke does not reach the alarm.
This project is continued from How to Install a Hardwired Smoke Alarm – Part 2. The VELCRO Brand Heavy Duty range blends into the walls. Available in black and white. I herd of removable mounting tape, but i found that it still took off the paint. My ceiling is fairly but not perfectly smooth. Start by grabbing the mounting plate an with the black foam ring facing outwar screw the plate into the wall or ceiling using a power drill.
I dont know how to descibe it, but its kinda. Alarms should be at least twenty feet from smoke and combustion particle-producing features such as fireplaces, stoves, and furnaces. Avoid high humidity areas such as showers and laundry rooms.
Smoke detectors are an essential safety feature to have in any home. For optimum safety, you should install smoke detectors in every room and in every hallway. After you purchase a smoke detector , installation is the next step. To remove your old smoke detector , twist it counterclockwise and disconnect its wires by squeezing the plastic plug. Then, you’ll need to unscrew the mounting plate and disconnect the wires from it.
Most fire deaths occur in homes lacking smoke detectors. To protect your loved ones, it is imperative that you install smoke and. Know What Smoke Alarms Can and Can’t Do - A Smoke Alarm can help alert you to fire, giving you precious time to escape.
It can only sound an alarm once smoke reaches the sensor. See “Limitations of Smoke Alarms ” for details. Check Your Local Building Codes - This Smoke Alarm is designed to be used in a typical single-family home. Ceiling junction box wiring connections and mounting the smoke alarm.
The same size as a low voltage downlight fitting – and smaller than the average smoke detector. Designed to complement existing interior décor. DO NOT overtighten the mounting screws. When the detector is mounted to an electrical mounting box (square, octagonal), the mounting plate may bow as a result of the mounting box screw tabs being below flush with the top edges of the mounting box.
Read “Where to Install This Alarm ” and “Where This Alarm Should Not Be Installed” before you begin installation. You have purchased a state of the art Smoke Alarm designed to provide you with early warning of improper location. Clean the Smoke Alarm as described in “Regular Maintenance,” and then test the Smoke Alarm again. Place the alarm ’s mounting plate on the remodel box and align the screw holes.
Make sure the wire connection runs through the mounting plate. Carefully put the connected wires and plug through the mounting plate. Connect the wired harness to the back of the smoke alarm.
These are usually configured to ensure they can only fit one way.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.