Wednesday, July 31, 2019

Notifier beam detector

With only one device to install and align, these single-ended optical beam solutions saves you time and money on large area applications. NOTIFIER ’s third edition of the Fire and Gas Detection Catalogue contains innovative and intelligent products for a broad range of applications in the life safety domain. NOTIFIER by Honeywell has been manufacturing and supplying fire detection and alarm systems for more than years.


Notifier beam detector

The beam detector should not be installed in environments where there is no temperature control and condensation or icing is likely. Projected beam detectors are usually located with their beams parallel to the ceiling. However, they can be mounted vertically or at any angle to protect the area involved. Beam Detector Application Guide. FSB-2Smoke Alarm pdf manual download.


Since beam detectors sense the smoke buildup over a distance, they are ideal for locations with high ceilings. It operates primarily on the principle of light obscuration utilising infra-red light. Protection range between and 1meters. Adjustment of beam intensity on three levels based on distance and on levels based on sensitivity through dip-switch. Automatic gain dusty compensation for loss of signal.


Notifier beam detector

Alignment is easily accomplished with an optical sight and a two-digit signal strength meter incorpo-rated into the beam detector. Also for: Fsb-200s, Fsb-200a, Fsb-200sa. These devices are typically installed in large areas where spot type smoke detection is not practical due to cost or location. Notifier Fire Alarm System. Sensitivity and the delay time for fault indication adjustable.


The detector also allows the detection of open fires (flame). The ability of a beam smoke detector to compensate for light signal degradation due to dust or dirt. Rate of compensation is limited to insure that the detector is still sensitive to slow, smoldering fires.


The Opal photoelectric smoke detector has a completely new detection chamber design, the result of many years of research and development. The SPC-detector should be placed so that smoke generated by a fire will likely rise into the path of the beam. The receiver is constantly monitoring and measuring the intensity of the beam transmitted by the emitter.


The model NFXI- BEAM is an addressable long range projected beam smoke detector designed to provide open area protection. Smoke entering the area between the two components causes a reduction in the signal returned to the receiver. The OSID range of open-area smoke detectors deliver a great package for reliable smoke detection in large or open spaces. With the use of CMOS imaging technology OSID not only provides reliable smoke detection but has been designed for rapid installation and reliable operation during the life time of the detector.


Notifier beam detector

The transmitter emits an invisible infrared light beam that is reflected via a prism mounted directly opposite and with a clear line of sight. System Sensor offers the broadest lines in conventional smoke detection. Please contact us for more details. Fill Your Cart With Color today!


They are uniquely suited for protecting open areas with high ceilings where spot-type smoke detectors are difficult to install and maintain. We buy, sell, and repair fire alarm parts. This article will walk you through the NFPA requires for smoke detectors spacing based on the ceiling height and beam depths.


Notifier beam detector

Article also covers smoke spacing for corridors and rooms under 9square feet. Installation Sheet - OSID Smoke Detection System Detach Mounting Bracket and Front Cover. The Safety Centre are pleased to introduce our range of fire alarm beam detectors.


A wide variety of detectors from many of the leading detection system manufacturers.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.

Popular Posts