The Ei168RC RadioLINK Base is an easi-fit mounting plate with built-in RadioLINK. It provides wireless interconnect between alarms, i. Provides wireless interconnect between alarms, so when one alarm is triggere all alarms in the system sound. Eliminates the need for any cabling between the Ei4and the smoke, heat and CO alarms used in the system. The Ei1RadioLINK Base transmits a radio frequency (RF) alarm signal when the unit attached to it senses fire.
When it receives an RF signal from another Ei1Base , the attached alarm will sound. The alarm can also be fitted to an Ei168RC RadioLINK base to allow wireless interconnection of alarms and connection to additional RadioLINK devices. The EI168RC RadioLINK Base unit allows wireless interconnection between other Aico 1series and 1series alarms without the need for further wiring. Powered by 230V Mains. JavaScript seems to be disabled in your browser.
All alarms in the Series use the same Easi-fit base (a first for Aico CO alarms) and feature intelligent sensors, AudioLINK data extraction and SmartLINK wireless interconnection and whole system data monitoring capability. My installation of alarms was only wired as I wanted to add other alarms (CO) and the Ei4remote control I replaced one wired base unit with this one. The primary function of the RadioLINK base is to interconnect all Alarms in the system, i. Alarm senses fire, the Ei168RC base attached to that Alarm will transmit an RF signal that will activate the sounders in all the other Alarms. All devices on a RadioLINK System are connected via radio frequency instead of cabling, which enables installers to save on installation and labour costs.
Aico RadioLINK Wireless Fire and Smoke Alarm Systems. Memory function indicates if an alarm has been previously activated. One person test feature.
More responsive to flaming fires (Papers, Clothing). This battery is designed to outlast the useable life of the alarm. The alarm gives a fire warning when adequate smoke enters the alarm. An Easi-fit RadioLINK Base can also be used to provide wireless interconnection between alarms.
Please ensure your product is fitted by a qualified person. If the alarm has been installed with an Ei168RC radio frequency base , please note that the Ei168RC back up battery would last approx months if the power fails. Supplied with a radio-frequency base plate with a 30m signal range, up to Ei160RC radio-interlinked smoke alarms can be wirelessly connected within one system.
Protecting your home or place of business from fire is essential. Radio-interlinked smoke alarms communicate with each other via radio frequency (RF). Having an industry approved fire or smoke alarm in good working order is a legal requirement in most cases, and it will provide important peace of mind at home for you and your family. We provided an ergonomic designed earbud with an IPXlevel water resistant. Additionally, we enabled a Native Volume Control function for easy access during active movements.
Best of all, you’ll save money and get our great customer service! This Aico product is designed to work with the full range of Aico alarm products to create a radio link. Made from strong white plastic.
Free shipping for many products!
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.