Up to detector heads can report to a single ground level controller. Once the detector head is installe using the easy-fit mounting system an integral laser can be activated. Multisensor Detection. Keys to Increased Fire System Performance and False Alarm Reduction.
Free shipping for many products! At least one detector will be required in the space between every two beam. Ceiling divided by beams of more than in. Reduce the coverage area for each detector , and mount the detector to the bottom of the beams. Important Smoke must enter the chamber of the detector.
Projected beam detectors are usually located with their beams parallel to the ceiling. SimplexTimeRecorderCo. However, they can be mounted vertically or at any angle to protect the area involved. Beam Detector Application Guide.
Since beam detectors sense the smoke buildup over a distance, they are ideal for locations with high ceilings. Each detector consists of a transmitter, a receiver, and a remote. An optical beam smoke detector is a device that uses a projected beam of light to detect smoke across large areas, typically as an indicator of fire. They are used to detect fires in buildings where standard point smoke detectors would either be uneconomical or restricted for use by the height of the building. RU Smoke Alarm pdf manual download.
The beam detector should not be installed in environ-ments where there is no temperature control and condensation or icing is likely. The signal is reflected by a prism and analysed for smoke presence. By using advanced dual wavelength proje. More Buying Choices $169.
We buy, sell, and repair fire alarm parts. Find great deals on eBay for beam smoke detector. The Opal addressable beam detector is an intelligent reflector type linear optical beam smoke detector designed to operate with Notifier addressable fire alarm systems. It operates primarily on the principle of light obscuration utilising infra-red light. This detector offers cost effective protection of large, open area spaces with high ceilings.
AIKO GS5Smoke and Fire Alarm , Hardwire Interconnect Photoelectric. The new benchmark in beam detection. Using imaging technology, based on a CMOS Imager, the OSID range delivers fast installation and superior detection performance that cannot be achieved using a single photo receiver. The CMOS imager is the equivalent of hundreds of thousands photocells. Alignment is easily accomplished with an optical sight and a two-digit signal strength meter incorpo-rated into the beam detector.
Listed for operation from – 22°F to 131°F, the FSB-2and FSB-200S are usable in open area applications where temperature extremes ex-ceed the design limits of other types of smoke detection. Because of their capabilities, beam detectors can overcome some of the limitations of spot-type smoke detectors. The transmitter emits an invisible infrared light beam that is reflected via a prism mounted directly opposite and with a clear line of sight.
If the IR beam is obscured by smoke and the signal received drops below the selected threshold value for s, the Fireray triggers a fire alarm and the alarm relay closes.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.